Hioki FT6031 - Inserting;Replacing Batteries

25
Inserting/Replacing Batteries
2.3 Inserting/Replacing Batteries
Before using the instrument, insert 4 LR6 alkaline batteries. Before
measurements, check that the battery level is sufcient. When the
battery charge is low, replace the batteries.
WARNING
• To avoid electric shock, turn off the power and
disconnect the cables and test leads before
replacing the batteries.
• To prevent instrument damage or electric shock,
use only the screws for securing the battery cover
in place that shipped with the product.
If you have lost any screw or nd that any screws
are damaged, please contact your Hioki distributor
for a replacement.
• Battery may explode if mistreated. Do not short-
circuit, disassemble or dispose of in re. Do not
recharge alkaline batteries. Handle and dispose of
batteries in accordance with local regulations.
• After replacing the batteries, replace the cover,
screws, and put on the protector before using the
instrument.