73
Error Display
4.3 Error Display
Error
display
Description Solution
Err1
Zero adjustment is outside the
allowable range, zero adjustment
has been executed while it is not
on HOLD.
Execute zero adjustment
again in accordance
with the zero adjustment
procedure.
(p. 35, p. 46)
Err2 Abnormality in setting data
Device failure.
Contact your authorized
Hioki distributor or reseller
to organize repair.
Err3 Adjustment data damaged
Err4 Adjustment data not yet written
Err5
Abnormality in measurement
circuit
Err6 Abnormality in rmware
To Next Page
Loading...
