5.2 General Specifications
138
External interface specifications
Accessory and Option Specifications
RS-232C interface (standard equipment)
Connector D-sub 9-pin connector × 1
Communication method Full duplex, Start-stop synchronization
Stop bits: 1 (fixed)
Data length : 8 (fixed)
Parity: None
Remote control by controller (REMOTE lamp will light up.)
Cancelation of remote operation with LOCAL key (REMOTE lamp will turn off.)
Hardware handshake function
Communication Speed 9600bps/38400bps
LAN interface (standard equipment)
Connector RJ-45 connector × 1
Electrical Specifications Compliant with IEEE802.3
Transmission Method 10Base-T/100Base-TX (automatic detection)
Protocol TCP/IP
Functions HTTP server (remote operation, firmware updates)
Dedicated ports (command control, data transfer)
Remote control by controller (REMOTE lamp will light up.)
Cancelation of remote operation with LOCAL key (REMOTE lamp will turn off.)
GP-IB interface PW3336-01/-03, PW3337-01/-03, specify at time of order)
Method IEEE488.1 1987 compliant; in reference to IEEE488.2 1987
Interface functions: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0
Remote control by controller (REMOTE lamp will light up.)
Cancelation of remote operation with LOCAL key (REMOTE lamp will turn off.)
Address 00 to 30
Accessories Voltage and current input terminal safety cover
PW3336, -01, -02, -03 4
PW3337, -01, -02, -03 6
Safety cover installation screws (M3×6 mm)
PW3336, -01, -02, -03 8
PW3337, -01, -02, -03 12
Instruction manual 1
Measurement guide 1
Power cord 1
Options
Communications and control options
Model 9637 RS-232C Cable (1.8 m, 9pin-9pin, crossover cable)
Model 9638 RS-232C Cable (1.8 m, 25pin-9pin, crossover cable)
Model 9642 LAN Cable (5 m, Supplied with Cross-Over Adapter)
Model 9151-02 GP-IB Connector Cable (2 m)
Model 9165 Connection Cord (1.5 m, metal BNC to metal BNC, not CE marked,
for the synchronized measurements)
Current sensor options
See external current sensor input specifications (CURRENT SENSOR) (p.151).
To Next Page
Loading...
