Appendix 2 Detailed Specifications of Output
A10
Note1:The rectifier can be selected on the Settings screen even for parameters for which there is no need to
specify a rectifier. In this case, the rectifier setting will be ignored by the instrument’s internal processing.
Note2:The channel can be selected on the Settings screen even for parameters for which there is no need to
specify a channel (efficiency). In this case, the channel setting will be ignored by the instrument’s inter-
nal processing.
Efficiency η1, η2
−
(Note 1)
ALL
(Note 2)
●●●−−−− −
Time average current T.AV A
AC+DC
AC+DC
Umn
1, 2, 3 ●●●●●●●
DC ±2 V
sum −−−−−−−
DC
1 ●●−−−−−
2 ●●−−−−−
3 ●●●−−−−
sum −−−−−−−
AC, FND 1, 2, 3, sum −−−−−−−
Time average
active power
T.AV W
AC+DC
AC+DC
Umn
1 ●●−−−●●
DC ±2 V
2 ●●−−−●●
3 ●●●−−●●
sum − ●● ● ● ● ●
DC
1 ●●−−−−−
2 ●●−−−−−
3 ●●●−−−−
sum −−−−−−−
AC, FND 1, 2, 3, sum −−−−−−−
Ripple rate
Voltage
Current
RF V %
RF A %
−
(Note 1)
1, 2, 3 ●●●●●●●
DC +2 V
sum −−−−−−−
Crest factor
Voltage
Current
CF V
CF A
−
(Note 1)
1, 2, 3 ●●●●●●●
DC +2 V
sum −−−−−−−
: Installed − : Not installed
Measurement items Display Rectifier Channel 1P2W×3
1P3W
&
1P2W
3P3W
&
1P2W
3P3W2M 3V3A 3P3W3M 3P4W
Rated output
voltage
To Next Page
Loading...
