Installation GRS1020/1120/1030/1130
Release
 
03
 
01/2017
25
1.6.2 10/100 Mbit/s twisted pair port
This port is an RJ45 socket.
The 10/100 Mbit/s twisted pair port offers you the ability to connect network 
components according to the IEEE 802.3 10BASE-T/100BASE-TX standard.
This port supports:
 Autonegotiation 
 Autopolarity 
 Autocrossing (if autonegotiation is activated)
 100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
 10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
Delivery state: Autonegotiation activated
The socket housing is electrically connected with the front panel.
1.6.3 100 Mbit/s F/O port (optional)
This port is an SFP slot.
The 100 Mbit/s F/O port offers you the ability to connect network components 
according to the IEEE 802.3 100BASE-FX standard.
This port supports:
 100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
Default setting: Full duplex
Pin Function
1 RD+ Receive path
2RD− Receive path
3 TD+ Transmission path
6TD− Transmission path
4,5,7,8 —
Table 10: Pin assignment 10/100 Mbit/s twisted pair port, RJ45 socket, MDI-X mode
1
2
3
4
5
6
7
8