Hirschmann GREYHOUND GRS1030 - Mounting a Media Module (Optional)

Installation GRS1020/1120/1030/1130
Release 03 01/2017
39
2.5 Mounting a media module (optional)
Hirschmann supplies the media modules in a ready-to-operate state. By
using a media module, you obtain up to 8 additional Fast Ethernet ports. You
have the option of mounting the media modules while the device is operating.
Figure 7: Mounting a media module
Proceed as follows:
 Remove the cover panel from the media module slot on the basic device.
 Open the lock of the media module by pressing the locking lever outwards
(step 1).
 Insert the media module straight into the media module slot (step 2).
 Close the lock of the media module by pressing the locking lever inwards
(step 3).
 Fasten the media module with the screws in the front panel of the basic
device.
1
2
3