Network load control
Basic - L3P
Release
4.0
11/07
8.4
QoS/Priority
31
Configuring Layer 3 management priority
Select the QoS/Priority:Global dialog.
In the line IP-DSCP value for management packets you enter
the IP-DSCP value with which the Switch sends management pack-
ets.
enable Switch to the Priviledged EXEC mode.
network priority ip-dscp
cs7
Assign the value cs7 to the management priority so
that management packets with the highest priority
are handled.
exit Switch to the Priviledged EXEC mode.
show network Displays the management VLAN priority.
System IP Address.............................. 10.0.1.116Subnet
Mask.................................... 255.255.255.0Default
Gateway................................ 10.0.1.200Burned In MAC
Address.......................... 00:80:63:51:7A:80Network Config-
uration Protocol (BootP/DHCP).... NoneDHCP Client ID (same as SNMP
System Name)...... "PowerMICE-518280"Network Configuration Proto-
col HiDiscovery..... Read-WriteManagement VLAN
ID............................. 1Management VLAN Priori-
ty....................... 7Management IP-DSCP Val-
ue....................... 56(cs7)Web
Mode....................................... EnableJavaScript
Mode................................ Enable
To Next Page
Loading...
Need help?
General
