Hisense I6433C7 User Manual

Cooking zone power can be adjusted by pressing the (H) or (I) keys for the respective cooking zone;
then continue with the next cooking zone.
During the first 10 seconds, automatic pan recognition can also be deactivated in user settings using
the "Au" parameter. See chapter User Settings.
The function can be used if the pan is already on the cooking hob or if the cooking hob is empty.
Power Boost
(depending on the model)
For rapid cooking, power boost can be activated on the cooking zones. This will allow you to rapidly
heat large amounts of food using extra power. The power boost is active for no more than 10 minutes;
then, the power level is automatically decreased to 9. If the cooking hob is not too hot, the power
boost can be reactivated for 10 minutes after it is switched off. To avoid overheating, the electronic
control function may automatically switch off the Power Boost earlier and decrease the power level
to 9.
Activating the Power Boost
The hob is switched on and a suitable pan is placed on one of the cooking
zones.
• Select the cooking zone.
• Set the power level to 9, then press the (I) key.
• Symbol "P" will appear on the display. The function is activated.
Deactivating the Power Boost
• Press the (H) key. Power boost will be deactivated and operating power will return to level 9.
• Power can be decreased to desired level by pressing the (H) key.
Overheat protection
• The hob is fitted with a cooling fan which cools the electronic components during cooking. The
fan may operate for a while even after the end of the cooking process.
• Induction cooking hob is also fitted with an overheating protector which protects the electronic
components from damage. The protector operates at several levels. When the cooking zone
temperature gets very high, the cooking power is automatically reduced. If this does not suffice,
the cooking zone power continues to decrease, or the safety mechanisms switches off the cooking
zone completely. In such case, the display unit will read “”F2””. When the cooking hob is cooled
down, its total power will be available again.
16

Hisense I6433C7 Specifications

General

Hob type	Zone induction hob
Frame type	Frameless
Finish type	Gloss
Warming zone	Yes
Product color	Black
Hob width size	59.5 cm
Top surface type	Glass-ceramic
Appliance placement	Built-in
Cooking zone 1 type	Regular
Cooking zone 3 type	Large
Cooking zone 4 type	Simmer
Cooking zone 1 boost	2000 W
Cooking zone 1 power	1500 W
Cooking zone 1 shape	Round
Cooking zone 4 boost	1600 W
Cooking zone 4 power	1200 W
Warming zone position	-
Cooking zone 1 diameter	180 mm
Cooking zone 1 position	Left front
Cooking zone 2 position	Left rear
Cooking zone 3 diameter	210 mm
Cooking zone 3 position	Right rear
Cooking zone 4 diameter	145 mm
Cooking zone 4 position	Right front
Number of cooking zones	4 zone(s)
Number of warming zones	4
Cooking zone 1 power source	Gas
Cooking zone 2 power source	Electric
Number of gas cooking zones	0 zone(s)
Stop & Go function	No
Country of origin	Slovenia
Clock type	Electronic
Timer type	Digital
Control type	Touch
Display type	LED
Control position	Front
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Connected load (gas)	0 W
Connected load (electric)	7200 W
Package depth	575 mm
Package width	640 mm
Package height	160 mm
Package weight	8100 g

Weight and Dimensions

Depth	520 mm
Width	595 mm
Height	58 mm
Weight	7600 g
Cord length	0 m
Installation compartment depth	490 mm
Installation compartment width	560 mm
Installation compartment height	74 mm