Hisun AXIS 110 - PRE-OPERATION CHECK LIST; Pre-Ride Inspection Items

5-1 Pre Operation Check List
Before operating this ATV, check the following points:
ITEM ROUTINE MARKER
Brakes
●
Check the operation, free play, fluid levels and look for any fluid leaks.
●
Add DOT 4 brake fluid if necessary.
●
Check to see if the disc brake rotor and the brake pads are worn beyond limits.
Parking Brake
●
Check to see if the parking brake functions normally.
Fuel
●
Check the fuel level.
●
Fill with fuel if necessary.
Engine oil
●
Check the oil level.
●
Fill with oil if necessary.
Throttle
●
Check the throttle cable operation and free play.
Wheels and tires
●
Check the tire pressure, wear and look for any damage.
Idle
●
Check to see if the idle speed is normal.
●
Take it to a dealer for adjustment if necessary.
Lights and switches
●
Check for proper operation of switches and that the lights all work.
Axle boots
●
Check each boot for tears or leaks.
Instrument Panel
●
Check and be sure all the instrument indicators are working properly.
Warning Lights
●
Check and be sure all the warning lights function normally on the panel.
EFI System
●
Check for any fault codes on the panel; repair the EFI system if necessary.
Gear Shift Lever
●
Check for proper operation