Use incorrect fuse
DANGERS MAY OCCUR
Using an incorrect fuse can cause severe
damage to the ATV and could result in a
fire.
HOW TO AVOID DANGEROUS
Always use specified fuses and never use
a replacement with defective materials.
Changing headlight bulb
If a headlight bulb burns out, replace it as
follows:
1. Pull off bulb holder cover (1) at the rear
of the headlight.
Note: Depending on your model, the
headlight bulb cover on back of the
headlight may just pull straight off or need
to be pushed in and turned counter
clockwise
2. Remove bulb holder (2) form headlight
housing by pushing in bulb holder and
turning counter clockwise.
① Cap of rear part of headlight
2 Cap of headlight bulb holder
To Next Page
Loading...
