Hisun AXIS 110 - Page 83

Periodic Maintenance and Adjustment 8-21
3. Remove defective bulb
WARNING
HIDDEN DANGER
Headlight bulb may still be hot if lights
were just turned off
WHAT COULD HAPPEN
Severe burns if touched
HOW TO AVOID DANGER
Make sure bulb is cool before touching or
removing.
4. Replace bulb with a new one
① Do not touch the glass portion of the
bulb.
CAUTION:
Do not touch the glass portion of the bulb
with your fingers. Touching the glass with
your fingers will allow oil from your skin to
affect the transparency of the glass, light
bulb luminosity and will shorten the life of
the bulb. If you do touch the bulb, or the
bulb comes in contact with oil or gasoline,
clean bulb with alcohol and a clean rag.
5. Install new bulb into bulb holder by
pressing in retainer and turning clockwise.
6. Reinstall the bulb and bulb holder into
the headlight assembly by pushing in and
turning clockwise.
7. Reinstall bulb holder cover.
CAUTION:
To keep moisture out of the headlight
assembly make sure the bulb holder cover
is installed correctly.