6-5 Operation
2. Activate brake lever, then shift into the
desired position.
NOTE:
Make sure the gear shift lever is fully
engaged in the correct position before
applying the throttle.
① Gear shift range
3. Release brake and accelerate gradually.
Gear shift lever:
Shifting to reverse
1. Stop vehicle and remove hand from
the throttle.
2. Hold the brake.
3. Move gear shift lever from neutral to
reverse.
NOTE:
When in reverse, the reverse light on
the front meter will illuminate. If the
reverse light does not come on, please
contact a service center.
4. Before going in reverse, look behind
the ATV for obstacles or people.
To Next Page
Loading...
