Connecting with a Euro Scart cable
Connect the Euro scart socket of the DVD to
the AV1 Euro scart socket on the TV.
Turn on the DVD player, insert a DVD.
Select AV1 input source using the INPUT
button on the remote control.
If connected to AV2 Euro scart socket, select
AV2 input source.
Refer to the DVD player's manual for
operating instructions.
NOTE
Any Euro scart cable used must be signal shielded.
Connecting with a S-Video cable
Connect the S-VIDEO output of the DVD to
the S-VIDEO input on the TV.
Connect the audio outputs of the DVD to
the AUDIO input jacks on the TV.
Turn on the DVD player, insert a DVD.
Select AV3 (S-Video) input source using
the INPUT button on the remote control.
Refer to the DVD player's manual for
operating Instructions.
To Next Page
