Hitachi Compute Blade 500 Series - Page 37

Switch module type
Number of installed switch modules
One Two Three Four
1/10 Gb/sec LAN switch
module
1 Gb/sec ports 4 8 12 16
10 Gb/sec ports 2 4 6 8
1 Gb/sec LAN pass-through module 16 32 48 64
10 Gb/sec LAN pass-through module 16 32 48 64
10 Gb/sec DCB switch module 8 16 24 32
8 Gb/sec FC switch module 6 12 N/A N/A
16 Gb/sec FC switch module 8 16 N/A N/A
Switches, Indicators and Connectors
1 Gb/sec LAN Switch Module (20 ports)
Figure 1-34 1 Gb/sec LAN Switch Module (20 ports)
Table 1-17 1 Gb/sec LAN Switch Module (20 ports) Switches, Indicators
and Connectors
Location Name State Description
1 LAN ports 1 to 4 Green-On Link established.
Green-Blink Link communication.
Amber-On Link failed.
2 Memory Card slot (MC) - Slot for an SD memory card.
3 Access LED (ACC) Green-On The SD memory card is accessed.
4 Reset switch (RST) - Press and hold for five seconds to reset
the LAN switch module.
5 Power LED (PWR) Green-On Powered-on, normal operation.
6 Status1 LED (ST1) Green-On Normal operation.
Green-Blink Power-on diagnosis or software
activation.
System Overview
1-29
Hitachi Compute Blade 500 Series System Overview Guide