Location Name State Description
Green-Blink Irregular blink: Link communication.
Slow blink: LAN interface online, but
segmented.
Rapid Blink: Diagnostic internal loop
back.
6 Uplink ports:
1 - 8
- By default these ports do not have
transceivers installed. The type of
transceiver varies according to usage.
Brocade 8 Gb/sec Fibre Channel Switch Module
Figure 1-40 Brocade 8 Gb/sec Fibre Channel Switch Module
Table 1-23 Brocade 8 Gb/sec Fibre Channel Switch Module Switches,
Indicators and Connectors
Location Name State Description
1 Identify LED (LOCID) Blue-On The switch module is identified.
2 Power LED (PWR) Green-On Powered-on, normal operation.
3 Status LED Green-On Normal operation.
Green-Blink Power-on diagnostics or firmware
activation.
Red-Blink Fault. Max temperature limit exceeded
or other warning.
Red-On Alarm.
4 FC ports: 0 - 5 - SFP+ module slots for connection of
fibre channel cables
5 Uplink port status LED1 Amber-On Signal or communication received, but
not online.
Amber-Blink Slow blink: The port is disabled.
Rapid blink: The port has failed.
6 Uplink port status LED2 Green-On FC port is online.
1-34
System Overview
Hitachi Compute Blade 500 Series System Overview Guide
To Next Page
Loading...
