Location Name State Description
Green-Blink Slow blink: The FC port is online but
segmented.
Rapid blink: Diagnostic internal loop
back.
7 USB port - For an optional USB memory device
dedicated to fibre channel switch
module.
Do not connect any other type of
device.
8 Management LAN port - Management LAN port for the fibre
channel switch module.
This LAN port is disabled by default.
9 Management LAN port
status LED1
Amber-On Management LAN port is online.
10 Management LAN port
status LED2
Green-On 1000 Mbps full duplex.
Brocade 16 Gb/sec Fibre Channel Switch Module
Figure 1-41 Brocade 16 Gb/sec Fibre Channel Switch Module
Table 1-24 Brocade 16 Gb/sec Fibre Channel Switch Module Switches,
Indicators and Connectors
Location Name State Description
1 Identify LED (LOCID) Blue-On The switch module is identified.
2 Power LED (PWR) Green-On Powered-on, normal operation.
3 Status LED Green-On Normal operation.
Green-Blink Power-on diagnostics or firmware
activation.
Amber-On Fault.
Amber-Blink Alarm.
4 Uplink port status LED1 Green-On FC port is online.
System Overview
1-35
Hitachi Compute Blade 500 Series System Overview Guide
To Next Page
Loading...
