Items Specifications
Number of CPUs Maximum: 2
Notes:
1. Inlet air temperature is restricted to 5 to 30°C [Non-operating: -10 to 43°C].
Table 2-9 Xeon Server Blade other specification (CB 520H B2)
Items Specifications
Main memory DIMM type (per slot) DDR3 RDIMM, 4 / 8 / 16 GB
LR-DIMM 32 GB
Operating mode Independent channel mode, Rank sparing mode, Mirrored
channel mode
Number of slots 24
Memory capacity Maximum: 384 GB (RDIMM 16 GB x 24); 768 GB (LR-
DIMM 32 GB x 24)
Memory frequency 800 / 1066 / 1333 / 1600 / 1866 MT/s
HDD/SSD Number of HDDs Maximum: 2
Capacity
1
Maximum: 2.4 TB
I/O Internal
disk I/F
Controller LSI SAS 2008
I/F SAS
Number of
I/F
Maximum: 2 (2.5 inch SAS HDD, SSD)
RAID
function
RAID 0, RAID 1
VGA Resolution 640x400 - 1680x1050
Refresh rate 60 - 85 Hz
Bit per pixel 8, 16, 32
Onboard
LAN
Midplane I/F 10 GB/1 GB Ethernet 2 port
Function Wake on LAN, PXE boot, iSCSI
Management
function
Remote console Supported
COM Serial redirection
DC input supply voltage DC + 12 V
Front interface USB 1 (USB2.0)
KVM connector 1 (VGA / COM / USB2.0 / 2 port)
DCMI (Data Center Management Interface) Not supported
Power consumption 613 W
External dimension (W x D x H: mm) 215.4 x 492.7 x 51.1
Mass Maximum: 7.1 kg
Specification
2-7
Hitachi Compute Blade 500 Series System Overview Guide
To Next Page
Loading...
