Hitachi Compute Blade 500 Series - Page 54

Items Specifications
Notes:
1.
Hard disk drive capacity is calculated assuming that 1 GB is equal to 10
9
bytes.
Table 2-10 Xeon Server Blade CPU specification (CB 520H B3) - 1
Items Specifications
Supported CPUs
E5-2699 v3
1
E5-2698 v3
E5-2697 v3
1
E5-2690 v3 E5-2660 v3 E5-2640 v3
Number of cores 18 C 16 C 14 C 12 C 10 C 8 C
CPU frequency 2.3 GHz 2.3 GHz 2.6 GHz 2.6 GHz 2.6 GHz 2.6 GHz
QPI frequency 9.6 GT/s 9.6 GT/s 9.6 GT/s 9.6 GT/s 9.6 GT/s 8.0 GT/s
L3 Cache 45 MB 40 MB 35 MB 30 MB 25 MB 20 MB
TDP 145 W 135 W 145 W 135 W 105 W 90 W
Number of CPUs Maximum: 2
Notes:
1. Inlet air temperature is restricted to 5 to 35°C [Non-operating: -10 to 43°C].
Table 2-11 Xeon Server Blade CPU specification (CB 520H B3) - 2
Items Specifications
Supported CPUs E5-2620 v3 E5-2603 v3
E5-2667 v3
1
E5-2637 v3
1
Number of cores 6 C 6 C 8 C 4 C
CPU frequency 2.4 GHz 1.6 GHz 3.2 GHz 3.5 GHz
QPI frequency 8.0 GT/s 6.4 GT/s 9.6 GT/s 9.6 GT/s
L3 Cache 15 MB 15 MB 20 MB 15 MB
TDP 85 W 85 W 135 W 135 W
Number of CPUs Maximum: 2
Notes:
1. Inlet air temperature is restricted to 5 to 35°C [Non-operating: -10 to 43°C].
Table 2-12 Xeon Server Blade other specification (CB 520H B3)
Items Specifications
Main Memory DIMM type (per slot) DDR4 RDIMM 8, 16 GB
LRDIMM 32 GB
Operating mode Independent Channel Mode, Rank Sparing Mode,
Mirrored Channel Mode
Number of slots 24
2-8
Specification
Hitachi Compute Blade 500 Series System Overview Guide