Hitachi Compute Blade 500 Series - Page 60

Table 2-20 Server Blade specification (Storage Expansion model)
Items Specifications
HDD/SSD Number of HDDs Maximum: 6
Capacity
1
Maximum: 5.4 TB
I/O Internal disk I/F Controller LSI SAS 2208
I/F SAS
Number of I/F Maximum: 6 (2.5 inch SAS HDD, SSD)
RAID function RAID 0.1, 5, 10.6
DC input supply voltage DC + 12 V
Front interface SAS 1 port (4 lanes)
Power consumption
93 W
2
External dimension (W x D x H: mm) 435.3 x 492.7 x 55.5
Mass
Maximum: 8.1 kg
3
Notes:
1.
Hard disk drive capacity is calculated assuming that 1 GB is equal to 10
9
bytes.
2. This is a value of single storage expansion blade.
3. This is a value of storage expansion blade including the shelf parts.
Table 2-21 Server Blade specification (PCI Expansion model)
Items Specifications
I/O PCI slot Interface PCI Express
Number of slots Maximum: 6 slots
- Full height, Full length slots: 2 (PCI expansion slot
0/1)
- Low profile (MD2) slots: 4 (PCI expansion slot
2/3/4/5)
Slot specifications PCI expansion slot 0 Electrical x8/Physical x8; Maximum: 25 W
PCI expansion slot 1 Electrical x8/Physical x8; Maximum: 25 W
PCI expansion slot 2/slot 3 - Electrical x8/Physical x8; Maximum: 25 W
(PCI blade card adapter x8 L/P)
- Electrical x4/Physical x8; Maximum: 25 W
(PCI blade card adapter x4 L/P)
PCI expansion slot 4/slot 5 Electrical x4/Physical x8; Maximum: 25 W
DC input supply voltage DC + 12 V
Power consumption
294 W
1
External dimensions (W x D x H: mm)
215.4 x 492.7 x 51.1
1
2-14
Specification
Hitachi Compute Blade 500 Series System Overview Guide