Hitachi Compute Blade 500 Series - Page 59

Items Specifications
Operating mode Independent Mode (Default), Lockstep Mode, Rank
Sparing Mode, Mirrored Memory Mode
Number of slots 48
Memory capacity Maximum: 1,536 GB (32 GB x 48)
Memory frequency 1333 / 1600 / 1866 MT/s
Inter-blade SMP (Symmetric Multi Processing) 2-blade SMP / 4-blade SMP
HDD/SSD Number of HDDs Maximum: 2
Capacity
1
Maximum: 2.4 TB
I/O Internal disk
I/F
Controller LSI SAS 3004
I/F SAS
Number of I/F Maximum: 2
RAID function RAID 0.1
VGA Resolution 640x400 - 1680x1050
Refresh rate 60 - 85 Hz
Bit per pixel 8, 16, 32
Internal USB port USB2.0 x 2port (For LPAR manager)
Onboard LAN Midplane I/F 10 Gb Ethernet 4 port
Function Wake on LAN, PXE boot, iSCSI, FCoE
Management
function
Remote console Supported
COM Serial redirection
DC input supply voltage DC + 12 V
Front interface USB
1 (USB 3.0)
2
KVM connector
1 (VGA / COM / USB2.0 / 2port)
2
DCMI (Data Center Management Interface) Supported
Power consumption 722 W
External dimension (W x D x H: mm) 435.3 x 492.7 x 55.5 (2S)
Mass
Maximum: 13.8 kg
3
Notes:
1.
Hard disk drive capacity is calculated assuming that 1 GB is equal to 10
9
bytes.
2. In SMP configuration between blades, VGA and COM are not available and only USB port is available
on non-primary server blades.
3. The Mass of a server blade includes that of SMP connection board.
Specification
2-13
Hitachi Compute Blade 500 Series System Overview Guide