Hitachi Compute Blade 500 Series - Page 102

Item Description
Remove LPAR Removes an LPAR.
Shut down LP Stops LPAR manager.
Reboot LP Reboots LPAR manager.
Save settings Saves LPAR manager configuration information.
Collect LP dump log Only for management module firmware version A0145
or later, LP dump in operation is collected and
downloaded.
Tip: See "USB/KVM" in Chapter 1, Hitachi Compute Blade 500 Series
Logical partitioning manager User's Guide for USB assignment and status
transition.
• LP Settings
LP Settings dialog box is shown by clicking Show LP Settings button in the
Settings tab or LP Settings button in the LPAR tab.
Table 2-98 Items in LP Settings dialog box
Item Description
Server Blade
Condition
1
Server Blade
status
Power Shows the power status of the
server blade.
LP Condition Shows the LPAR manager running
status only with the server blade
powered on.
2-92
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide