Hitachi Compute Blade 500 Series - Hcsm

Item Description
Alert: Sends failure- or warning-level alerts.
Information: Sends information-level alerts.
Disable: Sends no alerts.
Alert Retry
Interval [sec]
Specifies the alert retry interval when an alert cannot be sent to BSM.
Value: from 5 seconds to 50 seconds.
Default value: 5 seconds
You usually need not to change this value.
Alert Retry
Duration
[min]
Specifies the alert retry duration when an alert cannot be notified to
SC/BSM due to the temporary network disconnection.
Value: from 4 minutes to 20 minutes.
Default value: 10 minutes
You usually need not to change this value.
Table 2-278 Action buttons at the bottom
Item Description
Add Server Setting Adds SC/BSM servers for connection.
Remove Server Setting Removes registered SC/BSM servers that you select.
Edit Server Setting Edits selected SC/BSM server connection settings.
HCSM
This feature sets connection to HCSM (Hitachi Compute Server Manager) and
forcible disconnection from HCSM.
Operating the Web Console
2-219
Hitachi Compute Blade 500 Series Web Console User's Guide