Hitachi Compute Blade 500 Series - MegaRAID WebBIOS for LSI SAS 2008

Management LAN
Management LAN interface settings for server blades (BMC), switch modules,
and management modules, can be done on the window.
IP Address (IPv4) tab
Table 2-159 IP address (IPv4) items
Item Description
Module Shows the type of module and the module number.
IP Address Shows the IP address (IPv4), the subnet mask, and the default
gateway assigned to the management LAN of module.
Subnet Mask
Default Gateway
Connection Type Shows the type of switch module.
Table 2-160 Action button at the bottom
Item Description
Edit Edits the IP address (IPv4) settings of the management interface.
A checkbox item, "Not apply this Default Gateway setting to the LAN switch
module" shown in Edit IP Address window is a setting to provide a
compatibility with management module firmware version A0125 or earlier. If
not applying the Default Gateway setting to the LAN switch module, check
"Not apply this Default Gateway setting to the LAN switch module" shown in
Edit IP Address window.
Operating the Web Console
2-141
Hitachi Compute Blade 500 Series Web Console User's Guide