Assign firmware to Server Blade (Selecting LPAR manager F/W
version)
Table 2-72 Items in Assign firmware to Server Blade (Selecting LPAR
manager F/W version)
Item Description
Server Blade No. Shows the target server blade to assign LPAR
manager firmware.
LP firmware version pull down
list
Selects an LPAR manager firmware version.
Table 2-73 Action button at the bottom
Item Description
Next Confirms the LPAR manager firmware version and goes to the Assign firmware to
Server Blade (Operating LPAR manager configuration information).
Cancel Cancels the settings and closes the Assign firmware to Server Blade (Selecting
LPAR manager F/W version) dialog box.
Tip: In SMP configuration, settings for the primary server blade are applied.
If a non-primary server blade is selected, the settings are shown but LPAR
manager will not operate with those setting values.
Assign firmware to Server Blade (Operating LPAR manager
configuration information)
2-76
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
