Hitachi Compute Blade 500 Series - Page 85

Item Description
Virtual COM console
port
1
Displays the TCP port to be connected to a
virtual COM console via Telnet or SSH.
Authentication
settings
Password expiry
1
Displays the password expiration period. Either
Infinite or the number in the range from 0 to
365 is displayed.
LP SSH Host Key
Algorithm
1
Displays the SSH host-key algorithm. For LPAR
Manager, the algorithm is fixed to RSA 2048.
Fingerprint
1
Displays the SSH host-key fingerprint.
Note:
1. This item is displayed only if the server blade is powered on. If the server blade is
powered off, "-----" is displayed.
Table 2-71 Action buttons at the bottom
Item Description
Save settings Save LPAR Manager settings.
Assign firmware to Server
Blade
Assigns LP firmware to the server blade.
(The Assign firmware to Server Blade dialog box appears.)
Change LP model Assigns an LP model to the server blade.
(The Change LP model dialog box appears.)
While the server blade is starting, this button is
deactivated.
Edit system settings Specifies settings for the items necessary for LPAR
Manager to start.
(The Edit system settings dialog box appears.)
Edit LP CLI Specifies settings for LP CLI.
(The Edit LP CLI dialog box appears.)
Edit virtual COM console
settings
Specifies settings for a virtual COM console.
(The Edit virtual COM console settings dialog box appears.)
Edit user settings Specifies settings for the user authentication functionality.
Manage user account Manages user accounts.
Show authentication log Displays authentication logs.
Recreate SSH host key Recreates the SSH host key.
Operating the Web Console
2-75
Hitachi Compute Blade 500 Series Web Console User's Guide