Hitachi Compute Blade 500 Series - Features

Bar/Panel Item Function
Navigation
area
Resources On the left of the window, modules and features for
setting and operation are shown like a tree. To set an
item, select the item from the tree to perform it.
General Tasks Dumplog Download logs from the management module.
Edit login account settings Changes settings including the user password with which
you have currently logged in and the language used in the
Web console.
Application
area
A module selected in the navigation area or the tree in
detail is shown.
See
Resources on page
2-15, Alerts on page 2-182, or
Administration on page
2-189.
Tip:
•
To update the contents on the Web console, click Refresh. The contents
on the Web console will not be automatically updated.
• The Web console windows, which are used in the following pages, are
samples.
Features
The following table describes tabs and their navigation trees on the Web
console window.
Table 2-3 Features
Tree configuration Description
Dashboard tab The first window shown after login.
Shows the general operation
status, power consumption, and
logs of events that have occurred
in the system unit.
Resources
tab
1
Modules
2
Chassis Manages a system unit.
Shows the operation status;
manages USB devices connected
to the system; sets the chassis ID;
shuts down the system unit.
Server Blades
3
Server Blade
0 – 7
Shows the operation status,
hardware information, and
configuration of a specified server
blade, and operates the server
blade.
Sets and operates BMC, EFI,
mezzanine cards onboard, and
LPARs on this window as well.
Switch modules
4
Switch Module
0 – 3
Shows the operation status,
hardware information, and
configuration of a specified switch
2-6
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide