Hitachi Compute Blade 500 Series - Page 230

HCSM Service tab
Table 2-279 Action item
Item Description
Send alert Sends an alert for a test of switching server blades at N+M cold standby.
Select N+M Immediate alert or N+M Delay
Table 2-280 HCSM Service items
Item Description
HCSM Shows Enable or Disable HCSM.
Port number Shows a port number used by HCSM. The value cannot be changed on
this window.
Default value: 443.
The value can be changed in HTTPS tab on page 2-209.
Access
control
Shows Enable or Disable the access control to the management module
due to the IP address.
Enable: Only access from HCSM with the address shown in HCSM Servers
tab on page 2-221 is available.
Account Shows the user for HCSM.
Table 2-281 Action button at the bottom
Item Description
Edit Edits HCSM service settings.
2-220
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide