Hitachi Compute Blade 500 Series - Page 158

Table 2-168 Internal LAN items
Item Description
IP address Shows the network used internally for the system unit. The subnet mask
is fixed: 255.255.255.0, which cannot be changed.
Subnet mask
Note:
•
Changing the internal network restarts the management module.
• Do not change the internal network when the server blade is in operation.
If you do, some failure events, occurred when the server blade is being
restarted, may not be detected.
Tip: If not using network IP addresses specified as
192.168.253.0/255.255.255.0 outside the system unit, you need not change
the internal network settings.
Table 2-169 Action button at the bottom
Item Description
Edit Edits the internal LAN settings.
Link fault tolerance
Fault tolerance in the management LAN interface can be set on this window.
You can enable or disable the link fault tolerance and set the monitoring time.
2-148
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide