Item Description
Maximum power
consumption
Shows the maximum value of power consumption for the last 3
minutes.
Minimum power
consumption
Shows the minimum value of power consumption for the last 3
minutes.
Accurate power
control value (APC)
APC (accurate power control)
Nothing is shown if DCMI mode enabled.
Emergency power
control (EPC)
Shows whether or not it is the target for EPC (emergency power
control) power capping. A value in parentheses, a value for a non-
primary server blade, cannot be used for operation even though it
can be changed. Non-primary server blades operate with the
primary server blade settings.
Accurate power
control (APC)
Shows whether or not it is the target for APC power capping. A
value in parentheses, a value for a non-primary server blade,
cannot be used for operation even though it can be changed.
Non-primary server blades operate with the primary server blade
settings.
Nothing is shown if DCMI mode enabled.
Server blade power
OFF sequence
Shows the order of server blades to be powered off when the
power exceeds the capacity. A value in parentheses, a value for a
non-primary server blade, cannot be used for operation even
though it can be changed. Non-primary server blades operate
with the primary server blade settings.
Present CPU
frequency
Shows the current CPU frequency.
Average CPU
frequency
Shows the average value of CPU frequencies for the last 3
minutes.
Maximum CPU
frequency
Shows the maximum value of CPU frequencies for the last 3
minutes.
Table 2-192 Action button at the bottom
Item Description
Edit power capping Sets the power capping (APC/EPC) to the selected server blade.
If DCMI mode is enabled, only EPC can be set.
Note: Do not disable Emergency power control (EPC).
Operating the Web Console
2-165
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
