Item Description
: A module has an error that stops the module working. Check details
of the failed event and remove the problem.
Module Shows the module where an error event occurred.
Slot Shows the slot number of the module installed.
XID Shows the code to indicate the event.
System
event log
Message Shows a brief description about the event. With warning or failed event,
click the message to open the dialog box for details.
Check Shows that the event has been checked.
Blank: This event has been checked. Checked events are not included in
the number of events shown in the system event log summary.
!: This event is not checked. Unchecked events are included in the number
of events shown in the system event log summary.
Table 2-224 Action button at the bottom
Item Description
Mark as confirmed. Confirm an unconfirmed event that you select.
Mark as unconfirmed. Returns a confirmed event that you select to be unconfirmed.
Select all Selects all events.
Show all SELs Shows all registered event logs. The initial setting shows the
latest 100 events.
Show details Warning and failed level events provide their details. Some events
may have no details.
This button is not available if with no details.
Optional Physical WWN change log
This window shows Optional Physical WWN change log history. Optional
Physical WWNs are switched at N+M cold standby and changed at the return
to the original state.
2-184
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide
To Next Page
Loading...
