Hitachi Compute Blade 500 Series - Page 24

Icon Description
Warning
One or more modules is/are in a waning state. Check
the contents in the event list.
Failure
One or more modules is/are in a failure state. Check the
contents in the event list.
Power summary (lower left panel)
Power summary shows values for input power and power consumption.
Table 2-9 Power summary items
Item Description
Input power (AC) Present input power Shows power (AC) currently input to the
system unit.
Accurate power control
value (APC AC)
(Present)
Shows the power capping value
converted to AC power.
Nothing is shown if DCMI mode enabled.
Power consumption
(DC)
Present power
consumption
Shows the total power consumed by
modules onboard.
Accurate power control
value (APC)
(Present)
Shows the APC (accurate power control)
power capping value in operation.
Nothing is shown if DCMI mode enabled.
Emergency power
control value (EPC)
Shows the EPC (emergency power
control) power capping value for
protecting the equipment.
Power rating of chassis Shows the total rated values of modules
onboard.
System event log (lower right panel)
System event logs are listed in this panel. The number of unchecked failures
is shown under the panel title bar.
This panel shows the latest 100 logs. To view all system event logs in the
system unit, click Show SELs. To download logs from the management
module, click Dumplog.
Table 2-10 System events
Item Description
Check Shows whether the event is checked or not.
[Blank]: This event has been checked. Checked events are not included in
the number of the summary.
[!]: This event is not checked. Unchecked events are included in the
number of the summary.
2-14
Operating the Web Console
Hitachi Compute Blade 500 Series Web Console User's Guide