Hitachi Compute Blade 500 Series - Page 69

Note: Changing the password of IPMI/SMASH user accounts to a null one (all
zero's) by entering "&null" is supported by the following version or later. To
change the password to a null one (all zero's) with previous versions, use Set
User Password command.
Server blade firmware
- For Xeon server blade 520H A1/B1: integrated FW version 01-61 or
later
- For Xeon server blade 520A A1: integrated FW version 02-31 or later
- For Xeon server blade 540A A1/B1: integrated FW version 03-12 or later
- For Xeon server blade 520H B2: integrated FW version 04-08 or later
- For Xeon server blade 520H B3 or later: integrated FW version 08-01 or
later
- For Xeon server blade 520X or later: integrated FW version 06-01 or
later
Note: The password aging function of the IPMI user account setting items are
supported by the following firmware versions.
Server blade firmware
- For Xeon server blade 520X or later: integrated FW version 06-23,
07-15 or later
- For Xeon server blade 520H B3 or later: integrated FW version 08-16 or
later
Note: TLS versions in Server blade Web console items are supported by the
following firmware versions.
Server blade firmware
- For Xeon server blade 520H A1/B1 : Not supported
- For Xeon server blade 520A A1: Not supported
- For Xeon server blade 540A A1: Not supported
- For Xeon server blade 520H B2: Not supported
- For Xeon server blade 520H B3 or later: integrated FW version 08-01 or
later
- For Xeon server blade 520X or later: integrated FW version 06-01 or
later
Note: TLS versions in Remote console items are supported by the following
firmware versions.
Server blade firmware
- For Xeon server blade 520H A1/B1 : Not supported
- For Xeon server blade 520A A1: Not supported
- For Xeon server blade 540A A1: Not supported
- For Xeon server blade 520H B2: Not supported
- For Xeon server blade 520H B3 or later: integrated FW version 08-01 or
later
Operating the Web Console
2-59
Hitachi Compute Blade 500 Series Web Console User's Guide