Hitachi Compute Blade 500 Series - Page 71

- For Xeon server blade 520H B3 or later: integrated FW version 08-01 or
later
- For Xeon server blade 520X or later: integrated FW version 06-01 or
later
Note: Settings for IPv6 DNS server in DNS items are supported by the
following firmware versions.
Server blade firmware
- For Xeon server blade 520H A1/B1: Not supported
- For Xeon server blade 520A A1: Not supported
- For Xeon server blade 540A A1: Not supported
- For Xeon server blade 520H B2: Not supported
- For Xeon server blade 520H B3 or later: integrated FW version 08-01 or
later
- For Xeon server blade 520X or later: integrated FW version 07-03 or
later
Note: LDAP items are supported by the following firmware versions.
Server blade firmware
- For Xeon server blade 520H A1/B1: Not supported
- For Xeon server blade 520A A1: Not supported
- For Xeon server blade 540A A1: Not supported
- For Xeon server blade 520H B2: integrated FW version 04-25 or later
(LDAP Ph.2: integrated FW version 04-35 or later)
- For Xeon server blade 520H B3 or later: integrated FW version 08-01 or
later
- For Xeon server blade 520X or later: integrated FW version 06-01 or
later
Management module firmware
A0180 or later
Note: RADIUS function is supported by the following firmware versions.
Server blade firmware
- For Xeon server blade 520X or later: integrated FW version 06-23,
07-15 or later
- For Xeon server blade 520H B3 or later: integrated FW version 08-16 or
later
Note: When restarting BMC with "Turn sub power off" option, A 10Gb LAN
pass through module (Model name : GG-BE3LPS2X2-Y) port may not link up
after restart BMC.
This phenomenon may occur when A 10Gb LAN pass through module is
connected to Brocade VDX switches.
This phenomenon can be avoided with any of the following workarounds:
Operating the Web Console
2-61
Hitachi Compute Blade 500 Series Web Console User's Guide