Hitachi Hi8 VM-H70E User Manual

POWER SOURCES
NOTES
• Be sure to turn off power of the camera/
recorder when attaching or detaching a
power supply (battery, AC adapter/charger,
etc.) to/from the camera/recorder.
• Before attaching the external power
adapter, check that there is no sand, water
or dirt adhering to the terminal of the
attachment section. If anything adheres to
the terminal, use the brush (provided) or a
soft cloth to wipe it off completely.
Terminal
■ WHEN USING WITH THE BATTERY (provided)
NOTE: The battery must be charged before it can be used for the first time. Refer to "CHARGING THE
BATTERY" on page 18.
Loading the battery
1. Push the BATT. EJECT lever in the direction of
the arrow to unlock the battery compartment
cover. Pull the projection forward to open the
cover.
3. Close the cover firmly.
NOTE; Check that the BATT. EJECT lever is
aligned with the mark after closing the cover.
If the cover is not closed securely, water or
dust may enter the battery compartment.

Hitachi Hi8 VM-H70E Specifications

General

Brand	Hitachi
Model	Hi8 VM-H70E
Category	Measuring Instruments
Language	English