About the Hitachi Universal rack
Hitachi Universal racks and can be used to mount a Hitachi Unified Storage
VM system controller and one or more drive trays. The following figure shows
views of the Hitachi rack. Table C-1 Hitachi Universal rack basic specifications
on page C-3provides the basic specifications of the rack. Table C-2 Hitachi
Universal rack specifications on page C-3provides detailed specifications of
the rack. Additional figures and specifications showing and describing the
rack and the required PDUs are included also in this appendix.
Note: Customer-supplied racks with the same specifications as the Hitachi
Universal rack can also be used to mount a Hitachi Unified Storage VM
storage system.
Figure C-1 Hitachi Universal rack (shown without doors or side panels)
C-2
Rack information
Hitachi Unified Storage VM Block Module Hardware User Guide
To Next Page
Loading...
