EasyManua.ls Logo

Hitachi HUS VM - Types of PDU Plugs

Hitachi HUS VM
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Item
Americas
1
International
Input Specifications
Voltage
208 VAC
2
208 VAC/400 VAC
Frequency 50/60 Hz 50/60 Hz
Line Current 30A Max 32A Max
Load Capacity 6.90 KVA 7.36KVA
Overload Protection: Circuit Breaker (2) 2P/15A UL489 (2) 2P/16A UL489
Power Cord: 10' (3m), #10AWG/3C Yes Yes
Connector NEMA L6-30P 56P332 Plug
Indicators: Power-on, LED Yes Yes
Output Specifications
Voltage 208 VAC 200 - 250 VAC
Current (Total Combined Load) 30A 30A
Outlets: 2x 12 IEC C13 Yes Yes
Mechanical Specifications
Material: CRS Yes Yes
Finish: Powder Coat, Black, Fine Texture Yes Yes
Lettering: Silk-Screen, White/Epoxy Yes Yes
Storage Temp.: -13° to 149°F (-25° to 65°C) Yes Yes
Operating Specifications
Temperature: 32° to 122°F (0° to 50°C) Yes Yes
Relative Humidity: 0 - 95% (non-condensing) Yes Yes
Elevation: 0 - 10,000FT (0 - 3000 m) Yes Yes
Regulatory Specifications
Safety Agency: UL/cUL, UL60950-1, CE Yes Yes
RoHS: Compliant to Directive 2002/95/EC Yes Yes
Notes:
1. North and South America except Brazil, which has its own rack.
2, This is the PDU voltage rating. See Electrical specifications on page A-5 for system voltage ratings.
Types of PDU plugs
The following figure shows the PDU plug types that are used with the Hitachi
rack.
• The plug on the left is for single phase used in Canada, United States, and
the Americas (L6-30P)
C-8
Rack information
Hitachi Unified Storage VM Block Module Hardware User Guide

Table of Contents

Other manuals for Hitachi HUS VM

Related product manuals