Judgment Factor of SM Capacity
3
Program Product
1, 2
SI/VM/DP Extension
TC/UR
Extension
SM
Capacity
SI/VM2/
DP
TC/UR DT 1 2
3. Symbol key
X (N) Functions and Program Products described in the table are not
available as the SM used by the functions and the Program
Product is ineffective.
(Y) Functions and Program Products described in the table are
available when the SM used by the functions and Program
Products is effective. To use the Program Products, performing
installation operation separately is required (see note 4)
Example The SM capacity when TC is applied is 16 GB or more.
The SM becomes effective regardless of functional necessity of
SI/VM/DP, SI/VM/DP Extension1 and UR, and they can be
available to use by installation.
Functions marked with X(No) cannot be used)
4. For installation, see the Hitachi Storage Navigator User Guide.
Introduction
1-19
Hitachi Unified Storage VM Block Module Hardware User Guide
To Next Page
Loading...
