4-79 ●Set the print specifications
Display of Printing method
Icon Ink Drop Charge Rule Classification Printing method
Standard (Single scan)
When there are multiple printing lines,
multiple lines are printed in turn.
Standard (Interlaced),
Dot mixed interlaced
Multiple lines are printed at the same
time.
Mixed single scan and interlaced
Printing is done while switching
between single scan and interlaced for
each column.
Setting Direction of transport Printing results
0 : A B C a← A B C 1 2 3
→
→b
1 : A B C a←
←
→b A B C 1 2 3
2 : a←
←
→b
3 : a←
→
→b
A B C 1 2 3
A B C 1 2 3
ＡＢＣ123
Character orientation
●Printing direction of characters can be set.
●Settings and print results are as shown below.
4
A B C 1 2 3
A B C
A B C
A B C 1 2 3
A B C 1 2 3
Direction of transport
Example of setting "0:ABC→"
and Direction of transport "a".
a
b
Printing method
●Two printing methods are selectable: "single scan", "interlaced" and "mixed".
●A printing method will be automatically selected in accordance with the print format setup and
the ink drop charge rule.
5
●When making interlaced prints, perform the following setup.
(i) Ensure that the same print format is employed for all items.
(ii) Ensure that the same line count setting is employed for all columns.
(iii) The ink drop use percentage is 1/1 to 1/4.
Perform overall column setup. The format for the first item is
then applied to all the other items so as to provide interlaced
setup. When making a 1-line print, the single scan predominates
even if you perform steps (i) through (iii) .
●In the case of free layout, printting method is single scan fixed.
To Next Page
Loading...
Need help?
General
