When the ink ID is read, the lock on the ink side is released.
3
Tilt the lever handle toward yourself, lift and remove the
cartridge bottle.
4
Lever handle
Lift the lever handle and remove
the empty cartridge bottle.
● After removing the cartridge bottle from the IJP, quickly place the cap toward
the top. Also do not expose the cartridge bottle to impacts after being removed.
Doing so could cause ink to splatter.
● Do not turn the cartridge bottle with the cartridge bottle set in the IJP.
The ink cap could become loosened and ink may overflow.
● Do not put waste solution in used cartridge bottles.
Waste solution could spill. You should note that used cartridge bottles are not
hermetically sealed even when the over cap is mounted.
● If used cartridge bottles are filled with ink or makeup and reused, ink or
makeup could spill.
CAUTION
1 2 3
● If the lever handle could not be lifted up, do not pull it with excessive force.
In such a case, push the lever handle all the way in.
CAUTION
Lever handle
Push
To Next Page
Loading...
Need help?
General
