Hitachi L300P Series - Check Inverter Dimensions; Lfu2

Step-by-Step Basic Installation
Inverter Mounting
and Installation
2–8
Step 4: Locate the applicable drawing on the following pages for your inverter.
Dimensions are given in millimeters (inches) format. Smaller models come equipped with
NEMA1 adapter (conduit box) for wire entry for U.S. models (LFU and HFU). The NEMA 1
adapter is optional for larger models as indicated in the drawings.
4
Check Inverter
Dimensions
Model
L300P
-015LFU2
-015HFU2
-022LFU2
-022HFU2
-037LFU2
-037HFU2
-055LFU2
-055HFU2
150(5.91)
130(5.12)
2 - φ 6(0.24)
241(9.49)
255(10.04) 295(11.61)
130(5.12)
108(4.25)
3 - φ 28(1.10)
Wiring hole (knockout)
Exhaust
Air intake
Conduit box
40
(1.57)
6(0.24)
10(0.39)
21(0.83)
64.5(2.54) 75(2.95)
140(5.51)
62(2.44)
7(0.28)
143(5.63)
10(0.39)
7(0.28)
40
(1.57)
108(4.25)
Model
L300P
-075LFU2
-075HFU2, HFE2
-110LFU2
-110HFU2, HFE2
-150LFU2
-150HFU2, HFE2
Wiring hole (knockout)
Conduit box
Exhaust
Air intake
210(8.27)
189(7.44)
189(7.44)
203(7.99)
170(6.69)
260(10.24)
3 - φ 44(1.73)
2 - φ 7(0.28)
246(9.69)
168(6.61)
330(12.99)
10.5(0.41)
85(3.35) 80(3.15)
70(2.76)
21(0.83)
7(0.28)
10.5(0.41)
82(3.23)
7(0.28)
70(2.76)
80(3.15)