Hitachi PRIMAIDE 1440 - Page 83

3 - 35
Press
PROG
key.

SET PROGE NO. (1 - 9)
1
Press 1 key and then the ENT key.

EDIT MODE (MODIFY=0, NEW=1)
0
Press 1 key and then the ENT key.

TIME Ex Em BASE PMT
0.0 1 1
Press 0 key and then the ENT key.
Press 2 5 0 keys and then the ENT key.
Press 3 5 0 keys and then the ENT key.
Press 1 key and then the ENT key.
Press 3 key and then the ENT key.

TIME Ex Em BASE PMT
0.0 250 350 1 3 1
Press 1 0 keys and then the ENT key.
Press 2 7 0 keys and then the ENT key.
Press 3 7 0 keys and then the ENT key.
Press 2 key and then the ENT key.
Press 2 key and then the ENT key.

TIME Ex Em BASE PMT
10.0 270 370 2 2 1
Press 2 0 keys and then the ENT key.

TIME Ex Em BASE PMT
20.0 1
Press the ESC key.
Time program setting is now finished.

TIME Ex Em FL PROG LAMP [I]
0.0 250 350 0.0 1 Xe
Press the START key.
The time program starts and measurement is initiated.