Hitachi RCIM-1.0FSRE - Page 161

5 Optional functions
Optional functions through Remote control
SMGB0137 rev.0 - 05/2021
151
5
Item Optional function
Individual
Setting
Settings Setting conditions Description
H4
Not Used -
00
- Use at 00 conditions
01
KPI: Operation
modes for the
ventilation unit with
energy recovery
o
00
Air conditioning only
(factory setting)
This function is only available
for ventilation units with energy
recovery.
01 Ventilation only
02 Air conditioning + ventilation
H5
Not Used - 00/01 - Use at 00 conditions
H6
Not Used - 00/01 - Use at 00 conditions
J1
Not used -
00
- Use at 00 conditions
01
J2
Not used -
00
- Use at 00 conditions
01
J3
Colour of the Run
indicator
×
00 Green (factory setting)
–
01 Red
j4
Not used - 00/01 Not used (Use at 00 conditions)
J5
Not used -
00
- Use at 00 conditions
01
J6
Not used -
00
- Use at 00 conditions
01
j7
Not used - 00/01 - Use at 00 conditions
J8
Eco-operation ×
00
Function disabled
(factory setting)
When the unit is restarted by
the remote control switch, the
temperature automatically changes
to the setting temperature of “F5” or
“F6”.
Models:
RPF(I)-FSN2E
Not available, use at 00 conditions
01 Function enabled
Jg
Not used -
00
- Use at 00 conditions
01
jA
Not Used - 00/01 - Use at 00 conditions
jb
Not Used - 00/01 - Use at 00 conditions
k1
Not used -
00
- Use at 00 conditions
01
k2
Not used -
00
- Use at 00 conditions
01
k3
Not used -
00
- Use at 00 conditions
01
k4
Not used -
00
- Use at 00 conditions
01
02
03