Hitachi SJ200 Series - Page 23

21
C041 Overload level setting Rated
current of
inverter
C042 Frequency arrival setting for accel 0.0
C043 Arrival frequency setting for decel 0.0
C044 PID deviation level setting 3.0
C052 PID FBV function high limit 100.0
C053 PID FBV function variable low limit 0.0
C071 Communication speed selection
• 04 4800 bps
• 05 9600 bps
• 06 19200 bps
06 / 04
C072 Node allocation 1.
C074 Communication parity selection
• 00 No parity
• 01 Even parity
• 02 Odd parity
00
C075 Communication stop bit selection 1
C076 Communication error select
• 00 Trip (error code E60)
• 01 Decelerate to stop and trip (error code E60)
•02Disable
• 03 Free run stop (coasting)
• 04 Decelerate to a stop
02
C077 Communication error time-out 0.00
C078 Communication wait time 0.
C081 O input span calibration 100.0
C082 OI input span calibration 100.0
C085 Thermistor input tuning 100.0
C086 [AM] terminal offset tuning 0.0
C091 Debug mode enable
• 00 Display • 01 No display
00
C101 Up/Down memory mode selection
• 00 Clear last frequency (return to default
frequency F001)
• 01 Keep last frequency adjusted by UP/DWN
00
Func.
Code
Name / Description
Default
Value
–FEF / –FU
Set
Value