Hitachi SPX-WKT2 - WEEKLY TIMER OPERATION (Functions Menu)

NOTE
• The mer is controlled by this remote controller.
• The mer lamp of indoor unit does not turn on.
" " will be indicated when the
weekly mer operaon is acvated.
6 Select "Yes" by pressing "" or "" and press "OK".
The seng will be confirmed and the screen will return to the
normal mode.
To set other days of the week, select "Set other day" and press
"OK".
5 Press "OK". The confirmaon screen will be displayed.
The figure shows that following mers are set for Monday;
ON Timer : 6:00
OFF Timer : 9:00
Seng Temperature: 25°C
• When "ON Time" or "OFF Time" is selected, the seng me
can be set every 1 minute by pressing "" or "".
Press and hold "" or "", the seng me will change
more quickly. (10 minutes acceleraon)
• Five different schedule mers (max.) can be set for each day
of the week.
• Press or keep pressing "" or "" to adjust numbers.
4 Select the schedule No.(from 1 to 5) by pressing "" or "".
Select "ON Time", "OFF Time" or "Seng Temperature" by
pressing "" or "".
Set the ON/OFF mer and temperature by pressing "" or
"".
• " " (operaon) and " " (stop) will be displayed on LCD.
3 Select the day of the week (from Monday to Sunday) by
pressing "" or "". Press "OK".
NOTE
• If the present me has not been set yet, automacally
"Adjusng Date/Time" will be displayed.
• In this case, " " is indicated on LCD of the normal mode.
• Refer to "Adjusng Date/Time" secon of this manual.
•
When "Sleep Timer" operaon is set, this funcon cannot be set.
(" " will be displayed if the funcon is not available.)
2 Select "Day/Time Seng" by pressing "" or "" and
press "OK".
1 Select "Weekly Timer" from the menu and press "OK".
This funcon is used to start or stop the unit operaon at the
seng me.
Temperature can be also set when the unit is operated.
Five different schedule mers (max.) can be set for each day
of the week.
5.4.1 Weekly schedule seng
5.4 WEEKLY TIMER OPERATION ("Funcons" menu)
- 11 -
English