Hitachi SPX-WKT2 - SIMPLE TIMER OPERATION (Functions Menu)

NOTE
• The mer is controlled by this remote controller.
• The mer lamp of indoor unit does not turn on.
• During "Simple mer" operaon, if "Leave Home"
operaon is started, the seng will be automacally
changed to "Not Used".
" " will be indicated when the
mer operaon is acvated.
5 Select "Yes" by pressing "" or "" and press "OK".
The seng will be confirmed and the screen will return to
the normal mode.
4 Press "OK" to finish the simple mer seng.
The confirmaon screen will be displayed.
NOTE
• If "Once" of the mer operaon seng is selected, the seng
content will be automacally changed to "Not Used" aer
"Once" mer operaon.
3 Press "" or "" to set each seng content for the selected
item. When "Timer Op." is selected, the seng contents are
switched in order of "Not Used" <---> Once" <---> "Everyday"
by pressing "" or "". When "ON Time" or "OFF Time" is
selected, the seng me can be set every 10 minutes by
pressing "" or "".
Press and hold "" or "", the seng me will change more
quickly.
2 Press "" or "" to select the seng items. The seng
items are displayed "Timer Op.", "ON Time" and "OFF Time".
NOTE
• If the present me has not been set yet, automacally
"Adjusng Date/Time" will be displayed.
• In this case, " " is indicated on LCD of the normal mode.
• Refer to "Adjusng Date/Time" secon of this manual.
•
When "Sleep Timer" operaon is set, this funcon cannot be set.
( " " will be displayed if the funcon is not available.)
1 Select "Simple Timer" from the menu and press "OK".
The simple mer seng will be displayed.
This funcon is used to start or stop the unit operaon at the
seng me. The mer operaon contents can be set from
"Once" to "Everyday".
5.2 SIMPLE TIMER OPERATION ("Funcons" menu)
- 9 -
English