Hitachi SPX-WKT2 - 5 Menu Operation; Menu

NOTE
• If the menu screen remains unchanged for approximately
10 minutes, the screen will automacally return to the
normal mode.
Press " " (return/help) again to return to the normal
mode. (Operaon Mode Indicaon)
3 Press " " (return/help) to return to the first level menu.
ex. Select the"Funcons"
(The display in stop)
2 Select the funcon by pressing "" or "" and press "OK".
(" " will be displayed if the funcon is not available.)
Page 2/2
When "filter sign" is turned on
Page 2/2Page 2/2
The display during operaon
Page 1/2
The display during stop
Page 1/2
Select the "Remocon Sengs" Select the "Funcons"
NOTE
• The "Funcons" menu items vary depending on which is
displayed in the stop and in operaon.
1 Press " " (menu).
Select "Funcons" or "Remocon Sengs" by pressing ""
or "" from the menu and press "OK".
NOTE
: Unable to set
If the funcon with " " is selected from the menu, "Seng
Disabled" will be displayed on the lower screen.
All seng funcons can be displayed in the menu.
Refer to the following secons for each funcon.
5.1 MENU
5. MENU OPERATION
- 8 -