Hitachi SPX-WKT2 - LEAVE HOME OPERATION

NOTE
• The mer is controlled by this remote controller.
• The mer lamp of indoor unit does not turn on.
• Number of day is counted when clock indicates 0:00.
" " will be indicated when the day
mer operaon is acvated.
3 Select "Yes" by pressing "" or "" and press "OK".
The leave home operaon will be started and the screen will
return to the normal mode. (Leave home operaon display)
NOTE
• If the present me has not been set yet, automacally
"Adjusng Date/Time" will be displayed.
• In this case, " " is indicated on LCD of the normal mode.
• Refer to "Adjusng Date/Time" secon of this manual.
2 Select "Yes" in the day mer operaon by pressing "" and
select "Nb of days ?" by pressing "".
Set number of days (1 to 99 days) by pressing "" or "" and
press "OK". The confirmaon screen will be displayed.
1 During stop or operaon, select "Leave Home" from the
menu and press "OK".
The screen of "Set Period ?" selecon will be displayed.
5.5.2 Day mer operaon
4 Set the temperature by pressing "" or "".
Temperature range can be set between 10°C and 16°C.
Keep pressing and the value will change more quickly.
3 Select "Yes" by pressing "" or "" and press "OK".
The leave home operaon will be started and the screen will
return to the normal mode. (Leave home operaon display)
2 Select "No" in the connuous operaon and press "OK".
The confirmaon screen will be displayed.
1 During stop or operaon, select "Leave Home" from the
menu and press "OK".
The screen of "Set Period ?" selecon will be displayed.
5.5.1 Connuous operaon
Prevent the room temperature from falling too much when no
one is at home. The inial seng temperature is 10°C and the
temperature range can be set between 10°C and 16°C.
This operaon is able to operate by "Connuous operaon" or
"Day mer operaon". Please use "Day mer operaon" to set
the number of days up to 99 days.
5.5 LEAVE HOME OPERATION ("Funcons" menu)
- 15 -
English