At least one thermistor is needed to ensure normal operaon.
If both thermistors of remote controller and indoor unit are out of
order, please turn off the breaker and contact the sales agent at
once.
Thermistor of indoor unit
is not working.
Thermistor of remote
controller is not working.
If the followings are displayed in "Thermistor Selecon" funcon,
please contact the sales agent.
8.2.3 Thermistor Selecon
In this case, please turn off the breaker and turn on again aer
waing a lile.
If the failure recurs aer restart, then turn off and contact your
sales agent.
The operaon indicator (Red) is flashing and the alarm code is
displayed on the LCD.
8.2.2 Alarm Code
In this case, please turn off the breaker and turn on again aer
waing a lile.
If the failure recurs aer restart, then turn off and contact your
sales agent.
It occurs when can not communicate with this remote
controller and the indoor unit.
The operaon indicator (Red) is flashing and it connues to
display the "Connecng" on the LCD.
8.2.1 Communicaon failure
8.2 In abnormal condion
Turn on
"ECO Auto Off Mode" will be indicated on the screen of normal
mode when the operaon is stopped by "Eco Auto Off" funcon
Turn on
It is the seng performed by service personnel or sales agent.
If "Eco Auto Off" seng is used, when "Eco" operaon is started,
" " and " "
will be indicated on the screen of normal mode.
8.1.3 Eco Auto Off
Turn on
It is the operaon performed by service personnel or sales agent.
"Forced Cooling" and "External device" are turned on.
It will be displayed during the forced cooling operaon.
8.1.2 Forced Cooling
"External device" will disappear when operated from the
remote controller.
The display during operaonThe display during stop
Turn on
"External device" is turned on.
In this case, the operaon has been operated from external
device except the remote controller.
8.1.1 External device
8.1 In normal condion
8. OTHER INDICATIONS
- 25 -
English