Hitachi SPX-WKT2 - INFO FUNCTION (Functions Menu); FILTER SIGN RESET (Functions Menu)

NOTE
• If during operaon this is indicated then funcon
cannot be selected.
" " will disappear from the screen of normal mode.
2 Select "Yes" by pressing "" or "" and press "OK".
1 When unit is OFF, select "Filter Sign Reset" from the menu
and press "OK".
The confirmaon screen will be displayed.
When the unit is operated for a total of about 200 hours,
" " will be indicated on the screen of normal mode, it is
me to clean the filter.
This funcon is used to turn off the filter sign indicaon.
( Except auto filter cleaning models )
5.8 FILTER SIGN RESET ("Funcons" menu)
NOTE
• Indicated value shall be regarded as a guide only.
2 The heang power consumpon will be displayed.
Press "" or "", the cooling power consumpon will be
displayed.
Press "" or "" repeatedly, the heang power
consumpon and the cooling power consumpon will be
displayed alternately.
The display in operaon
The display in stop
1 Select "Info" from the menu and press "OK".
The receiving screen will be displayed.
This is the funcon to display the monthly power consumpon
on the remote controller screen.
5.7 INFO FUNCTION ("Funcons" menu)
- 18 -