Hitachi SPX-WKT2 - REMOTE CONTROLLER COMPONENTS; Display Panel Indicators; Operation Buttons and Functions

Operaon part
Return/Help Buon
To return to the previous
screen. When pressed at the
normal mode screen, will
display Help Menu.
Eco Buon
By pressing this buon during
operaon, the unit performs
the eco operaon.
Menu Buon
To display Menu.
Seng Temperature Indicator
Filter Sign Indicator
It is indicated at the set period
for filter cleaning.
Operaon Lock Indicator
It is indicated when the
operaon lock funcon is set.
Timer Indicator
It is indicated when the mer
funcon is set.
Sleep Timer Indicator
It is indicated when the sleep
mer is set.
Eco Auto Off Indicator
It is indicated when the eco
auto off funcon is set.
Enter BuonCross Buon
 : Up buon
 : Down buon
 : Le buon
 : Right buon
Auto Swing IndicatorFan Speed Indicator
START/STOP Buon
(Operaon indicator lamp)
Press this buon to start operaon.
Press it again to stop operaon.
Operaon Indicator Lamp
Lit in normal operaon and
flashes during fault condions.
Operaon Guide Indicator
Eco Mode and Forced Cooling
seng, and External device
operaon indicator
Operaon Mode Indicator
Room Temperature Indicator
(Around Remote Controller)
Display part
• Do NOT press the buons hard or press with sharply pointed material such as a ball point pen.
The operaon part of the remote controller may be damaged.
• Make sure that the buons are pressed soly with fingers.
NOTE
• If this remote controller is connected to the indoor unit, you can not set the timer operation at the wireless remote controller.
CAUTION
The figure below shows all the indications for reference. The actual display during operation is different.
2. NAMES AND FUNCTIONS OF REMOTE CONTROLLER
- 4 -